Skip to main content

Mettre à jour l'AOS

Etape 0 : Vérification de la version
-> show microcode
   Package           Release       Size     Description
-----------------+---------------+--------+-----------------------------------
KF3base.img       6.7.2.52.R01    15425911 Alcatel-Lucent Base Software
KF3os.img         6.7.2.52.R01     3693582 Alcatel-Lucent OS
KF3eni.img        6.7.2.52.R01     6533416 Alcatel-Lucent NI software
KF3secu.img       6.7.2.52.R01      602269 Alcatel-Lucent Security Management
Etape 1 : Donner une adresse IP au switch
-> ip interface "vlan1" address 192.168.1.10 mask 255.255.255.0 vlan 1
Etape 2 : Accorder les droits de connexion au serveur ftp du switch
-> aaa authentication ftp local
-> session timeout ftp 60
Etape 3 : Copier les nouveaux fichiers dans le répertoire working

À l'aide d'un client FTP, copiez les nouveaux fichiers dans le répertoire working.

Etape 4 : Copier le contenu du dossier working dans le dossier certified
-> copy working certified

SUN DEC 31 00:08:20 : CSM-CHASSIS (103) info message:
+++ == CSM == CERTIFYing software process started
+++ == CSM == Setting CERTIFY Timeout for 800 seconds

from /flash/working to /flash/certified
Copying KF3base.img                          ....................          completed
from /flash/working to /flash/certified
Copying KF3eni.img                           ....................          completed
from /flash/working to /flash/certified
Copying KF3fpga.upgrade_kit                  ....................          completed
from /flash/working to /flash/certified
Copying kf3miniboot.bs                       ....................          completed
from /flash/working to /flash/certified
Copying KF3os.img                            ....................          completed
from /flash/working to /flash/certified
Copying KF3secu.img                          ....................          completed
from /flash/working to /flash/certified
Copying kf3u-boot.bin                        ....................          completed
from /flash/working to /flash/certified
Copying software.lsm                         ....................          completed

+++ == CSM == Stack 1 Certify process Completed

SUN DEC 31 00:09:03 : CSM-CHASSIS (103) info message:
+++ == CSM == CERTIFY process completed successfully

Si vous obtenez l'erreur suivante : ERROR: Invalid request, CERTIFY requested while running on certified

Il faut redémarrer le switch en mode working avec la commande suivante :

-> reload working no rollback-timeout
Etape 5 : Reboot
-> reload
Confirm Reload (Y/N) : y
Etape 6 : Vérification de la version
-> show microcode
   Package           Release       Size     Description
-----------------+---------------+--------+-----------------------------------
KF3base.img       6.7.2.107.R01   15601299 Alcatel-Lucent Base Software
KF3os.img         6.7.2.107.R01    3693727 Alcatel-Lucent OS
KF3eni.img        6.7.2.107.R01    6575742 Alcatel-Lucent NI software
KF3secu.img       6.7.2.107.R01     618461 Alcatel-Lucent Security Management

Back to top