Supprimer le mot de passe admin

Pour remettre le mot de passe par défaut d'un switch alcatel, il faut entrer en mode Marvell.

Pour cela, dès le début du démarrage du switch, appuyer sur une touche lorsque : Hit any key to stop autoboot:

Hit any key to stop autoboot:  0


To use the switch rescue procedure first make sure of the following:

  - The Narescue.img file is located in the root directory of the
    USB flash device
  - The 6360 directory contains all the system files required to
    revive the switch.
    i.e. 6360/certified/<*.img boot.cfg>
         on the USB flash device
  - USB flash device is inserted

Once the above requirements are met, issue the following command
at the prompt to start the rescue process:

=> run rescue

***** Using the rescue process WILL destroy all switch data *****
*****              USE WITH EXTREME CAUTION                 *****

Marvell>>

Puis entrez la commande :

Marvell>> setAdminPasswordDefault
Reading Nvram:.. Done
Checking Nvram:  Rewrote 1 bytes

Puis redémarrer électriquement le switch